The LED light present on the top of a Linksys Velop node has too much to speak. You just need to understand the message. Like when the Linksys Velop stuck on blue it is a sign that there is a boot up problem despite the device is getting an internet connection. The solution to be followed in this case is rebooting. But, there are instances when the Linksys Velop solid red light shows up. Is the light present on your Linksys node flashing the solid red color? If yes, then the troubleshooting guide has finally made a way to your screen. All you have to do is read the information given here and follow the relevant hacks that are discussed further in this post.
Understanding Linksys Velop Solid Red Light
The solid red light on your Linksys Velop node is a sign that the node is not getting an internet connection. Now, the solution to be followed also hac humble depends upon the node that is flashing red. If it is the Parent node, then you are suggested to pay attention to the LAN cable holding a connection between your modem and the Parent node (router). FYI, the primary node is generally called the router in the Linksys Velop system.
Check if the cable is in working condition or not. Just in case it is not, you must get it replaced with a new one immediately. You also have to check the strength of the connection. It must be finger-tight at all costs. And how can you forget the ports in use. They must also be checked for damages.
Is it the secondary node that is solid red? If yes, then you must not wait for anything. Just pick it up and place it a little closer to your main node i.e. primary node. The node is supposed to be present in the range of the primary node. You can maintain an ideal distance of 8-10 ft. know that if you are planning to reduce this distance to zero, it won’t help you out. The reason being, it will result in a clash of the WiFi signals of the primary and secondary nodes that you should not let happen at any cost. But, if the Linksys Velop solid red light issue is still there, you need to have a look at the solutions written beneath.
Solved: Linksys Velop Solid Red Light Issue
- Perform a Linksys Mesh Reboot: There are occasions when networking devices fall victim to technical glitches. Technical glitches are capable of making your device non-functional at any hour of the day. Thus, you are advised to reboot your Linksys mesh system. When we say mesh system, we talk about rebooting all the Linksys units. There’s no restriction on which node to be powered down first. But, it will be great if you power up the first node before others. You can disconnect your main node from the modem during the reboot process.
- Ensure Stable Power Supply: The power being supplied to all of your Linksys nodes must be stable before and after the Linksys Velop setup. You cannot expect your Linksys Velop node to get connected to the internet and show you the blue light if it is not getting a stable power supply. All the nodes must be connected to working power outlets. Moreover, the power cables of the nodes must be free of damages. You are free to take the aid of a UPS in case random power outages are the reasons behind improper power supply.
- Experiment with Velop Location: Perhaps, the location of the Linksys Velop node is poor that is why it denying to get connected to the internet and is showing you the solid red light. Changing the Velop’s location is recommended in such a scenario. You must place the Velop nodes in ventilated spaces. Apart from this, all the Velop nodes are expected to be located in areas which do not house devices that emit electromagnetic frequencies and objects that carry a large amount of water. When it comes to reflexive surfaces, they must be Business Bay Metro Station Exit 1 placed away from the router and other Linksys nodes.
The Bottom Line
This is how you can get rid of the Linksys Velop solid red light issue. We hope that after taking into account the factors mentioned above, you will be able to get the problem fixed easily. Thanks for reading the post.