Is Linksys Router IP Address Not Working? How to Fix Issue?

Every Linksys wireless router comes with myrouter.local as the web address and an IP. Your device would have come with one too. The IP is used to set up and log in to the networking device. But, in case it stops working, then executing both these processes can come to a halt. Given you are reading this article, means that the IP is not working for you.

Well, in that case, you ought to walk through the troubleshooting solutions mentioned further. For your information, irrespective of the model which you have configured at home, the information provided below will prove to be useful for you.

How to Fix Linksys Router IP Not Working Issue?

1.      Enter the Correct IP Address

Start the troubleshooting process by putting the right IP address to use. Many users make the mistake of entering the IP with spaces or putting the decimal at the wrong place. There is a possibility that you have done the same thing. Now is the time to correct your mistake. Make sure that this time; you are entering the address without spaces. Also, ensure that the decimal should be placed at the right places.

Once done, check whether you are able to access your Linksys wireless router using the IP address. In case, you are not able to, then it is recommended that you keep reading.

2.      Clean Your Internet Browser

One of the many reasons which could have contributed to the Linksys router IP not working issue is that your browser is accumulated with cache, cookies, and browsing history. Usage of browser can do this with time. If not cleaned on time, the browser can prevent the browser from functioning at its usual speed. Taking this into consideration, do not waste even a single minute more before cleaning your browser.

The same can be done if you access the settings menu of your internet browser. By the way, depending on the browser which you are using, this option may vary.

3.      Tighten the Cable Connection

Chances are that the Ethernet cable which is used to connect the networking devices is faulty. By faulty, we mean that it has cuts on or in it. To take care of the problem, you ought to create a wireless connection between the devices or use a damage free Ethernet cable to do the exact same thing. Just ensure that the connection is tight. For this, you need to ensure that you hear a click sound after the cable has been plugged in.

At last, see to it that the connection vlone shirt between the networking devices is not too much as it can prevent the Ethernet cable from staying plugged into the ports located on them.

4.      Reset the Linksys WiFi Router

In case you are still a victim of the Linksys router IP not working issue, it could be because of any random reason which you are unable to detect. To take care of the problem, the best solution which you can implement is to reset or restore the wireless device to the factory default settings. The same can be done if you locate and press the button by the same name and hold on for some time. This needs to be done with the help of an oil pin.

Now, set up the process via the steps given in the manual. By the way, even if you have done Linksys RE6300 setup of extender at home, it would have come with a user manual.

To Conclude

This ends the troubleshooting guide consisting of the tips through which the Linksys router IP not working issue can be resolved. Despite reading all the solutions mentioned above, if you still cannot access your networking device using the default IP address, then take our advice and put the default web address to use.

You ought to know that the web address of a regular Linksys router is myrouter.local, and for mesh models, it is Thus, only after confirming the model which you are using, use the default web address to log in.

Did you like walking through the solutions given above? If yes, then do share a few words of appreciation in the comment section for the others to read.

Leave a Reply

Your email address will not be published. Required fields are marked *