Synology NAS not responsive issue has managed to give many users a headache. This usually happens when users try to go about the Synology login process. In case you are amongst them, then now is the time to thank your lucky stars as this article will provide you with every solution through which you can resolve the issue at hand in a hassle-free manner. Do you not believe us? Well then, continue reading and find out for yourself.
Avoid panicking if you do not understand any solution. Just re-read it to implement it in a better way. In case, you do not want to do that, then read the next solution in line.
Methods to Fix Synology NAS Unresponsive Issue
1. Check the Ethernet Cable
The very first reason why you are experiencing the Synology NAS system not responsive issue is that the Ethernet cable in use is damaged. Perhaps, rather than using a new cable, you ended up using the old and worn out one. To take care of the issue, it is recommended that you put the new cable to use. See if it works for you. If it does, well and good. On the off chance, it does not, take our advice, and walk through the next solution.
Just because one troubleshooting technique was not capable of helping you out does not mean that the others will prove to be non-worth as well. Have faith.
2. Restart the Synology NAS
Another attempt that can be made to resolve the issue in discussion is to restart the Synology NAS. Many users find the execution of the process very difficult, although it is quite simple. In case you too are not sure about whether you will be able to restart the system with ease or not, take our advice and go through the information provided in the product manual of your networking device.
3. Access NAS System Again
Sometimes, if the Synology NAS system is not accessible via a local network, that can also cause the Synology NAS not responsive issue for you. Taking this into consideration, check whether you can access the system using a local network or not. If you are, well and good, in case you are not able to, then you should not waste any more time in going through the troubleshooting solution presented after this one.
4. Connect to Any Other Port
Check the port located on the system. It is clean? No? And there, you have found the fourth reason why you cannot make your NAS work. To reverse the situation for you, you ought to clean the port with the help of a cotton swab. We are expecting that this work for you. Otherwise, you can try to connect to another port on the NAS. Ensure that when you plug the cable, you hear a click sound as a sign that the connection is finger-right.
5. Reset the Synology System
Despite reading and implementing all the troubleshooting tips mentioned in this article, if you still cannot resolve the issue that you are experiencing, then you know what your last resort is? Locate the reset button on your Synology NAS system. Once you find it, press it. Then, hold on for some time. To be specific, hold on for more than four seconds. Once done, using Synology Quick Connect, set up the system again.
Now, you might be wondering how you can go about the process. Well, for that, you ought to walk through the instructions given in the product manual of your networking device.
The Bottom Line
That was all about the troubleshooting solutions through which the Synology NAS not responsive issue can be resolved. Can you access your system after reading the methods given above? Yes? Well then, don’t you think that this calls for a bit of appreciation? If you agree, then drop a few of words of appreciation for your fellow readers to read. You can do this if you make use of the comment section located at the bottom of this post.
You can also read this buy IT equipment in the UK.
Also, while learning how to resolve the issue, were you able to wrap your head around another hack through which the same thing can be done? Yes? Share that as well.