Many users are troubled due to the Linksys extender slow WiFi speed problem. In case you too are in the same mess, then your search engine has redirected you to the right article as here you will find the methods through which you can boost the speed of your existing network with ease. It is recommended that you walk through this post.
However, prior to doing so, know that we have written this guide by taking the example of those users who have done Linksys RE6300 setup. This does not mean that if you have set up any other model, the tips given below will not work for you.
Methods to Enhance Linksys WiFi Extender Speed
1. Change the Connection Source
Get started with the first method by having a look at the connection source which is in use right now. In case it is wireless, it is recommended that you change the connection source without wasting any more time. To be specific, use an Ethernet cable to create a tight connection between the devices. Make sure that you clean the Ethernet ports prior to plugging the Ethernet cable into them to avoid facing more issues.
2. Update the Extender Firmware
In case it has been way too long since you last upgraded the firmware of your RE6300 extender, take our advice and reverse the situation by going about the process. For your information, there is just one method through which you can do this, that is, by accessing the Linksys range extender setup page. If you want to gain knowledge in detail about the execution of the process, you ought to read the instructions given in the product manual.
You might have received the product manual when you went to purchase the Linksys wireless range extender from the showroom.
3. Pull the Devices a Little Closer
If the distance separating the Linksys RE6300 extender and the host router is much more than required, then it could be stopping the signals emitted from your networking devices from getting transmitted properly. To take care of the problem, you ought to reduce the distance between them. This can be done if you disconnect the extender from its socket, and connect it to the one located near the router.
Ensure that you do not keep the networking devices too close to each other as this will force their signals to clash. If this happens, you can forget about fixing the issue at hand.
4. Keep Electronic Devices Away
Have your kept your Linksys RE6300 extender near cordless phones, treadmills, washing machines, televisions, baby monitors, microwave ovens, refrigerators, aluminum studs, fish tanks, mirrors, glasses, and speakers? Nodding your head yes? You have figured out the fourth reason why you are experiencing the Linksys RE6300 extender slow WiFi speed issue. To resolve it, change the location of your networking device right away.
Along with the examples given above, do not keep the wireless extender near concrete walls as they will not interfere but completely block the signals.
5. Call the Service Provider Now
Despite giving your hundred percent in resolving the issue in debate, if you still cannot boost the signal of your wireless device, then your last resort is to call your Internet Service Provider for confirming what we just said. If he says that the issue is from his end, do not waste even a single second more before giving him the time to resolve it. In case, the issue persists, reset the extender and execute the Linksys extender setup RE6300 process.
In Conclusion
We are ending the article written on what can be done to resolve the Linksys extender slow WiFi connection issue. Here is to hope that after going through the tips mentioned above, you will be able to boost the speed of your WiFi range extender with ease. In case what we are hoping for comes true, then share what you have to say through the comment section.
Also, if you were able to figure out some other tip through which the same can be done, it is suggested that you drop information regarding it in the comment section too. Your fellow readers might use your provided method and boost the speed of their network.